More From This Category

  • Victron Energy VE.Bus BMS V2


  • Victron Energy Lynx Smart BMS 500


  • Victron Energy Lynx Distributor


  • Victron Energy Lynx Shunt, 1000a rated 12/24/48v


Magnum ME-BMK Battery Monitoring Kit-Battery State of Charge Meter [Includes 500A/50mV DC Shunt]


50 in stock

50 in stock

Categories: SKU: 34-1033


The ME-BMK is a single battery bank amp-hour meter that monitors and provides important information about the condition of the battery. This information will let you know how much energy you have available, and let you plan your electrical usage to ensure the battery is not being over-discharged.

The ME-BMK is easy to install and is designed to be networked with a Magnum Energy inverter/charger using a remote (ME-RC50 or ME-ARC50) or router (ME-RTR) to display information about your battery bank.
DC volts: 7 to 70 ( 0.5%) auto voltage detection
DC amps: 0.1 to 999 ( 1.0%)
Battery SOC %: 0 to 100% (1% increments)
Power draw: .6 watts
Amp hours in/out: 32,768 amp hours (1 AH increments)
rAH out (resettable amp hours removed): 0 to 65,353 amp hours, resettable (0.1 AH increments)
tAH out (total amp hours removed): 0 to 65,535,000 amp hours (0.1 k or 100 AH increments)
Minimum/maximim DCV Display: 7 to 70 VDC, resettable
Shipping weight: 2 lb (.9 kg)
Kit includes: Manual, sense module, DC shunt, twisted pair wire, and communication cable
Sense wire: Twisted pair -blue & orange, 5′ length, 18 AWG wire
Communication cable: 4-conductor, 10′ twisted pair, telephone standard
Remote requirements: Use with an ME-RC with firmware revision of 2.0 or higher or an ME-ARC (all revisions)

Additional information

Weight 2 lbs
Dimensions 10 × 7 × 3 in


There are no reviews yet.

Be the first to review “Magnum ME-BMK Battery Monitoring Kit-Battery State of Charge Meter [Includes 500A/50mV DC Shunt]”

Your email address will not be published. Required fields are marked *

Related products